|
Join the fun with indoor and outdoor Park Extreme 3D flying! Foamy Flyers are great airplanes for all around flying yet capable of all aerobatic maneuvers including 3D. It's a great way to practice those tough maneuvers indoors or outdoors in light winds at considerably less cost!
FOAMY FLYER KIT DESCRIPTIONS:
Edge-2Xtreme
24" Park & Indoor Electric 3D Flyer
Specifications:
Wingspan: 24"
Airframe Wt. 1.5 oz
Flying Wt: 5.2 - 6.0 oz
The kit consists of Depron foam airframe components, Carbon fiber tube stiffeners, Spruce motor mount, pre-bent elevator joining wire, and complete assembly instructions. Building time is less than hour. Plan another 2 hours or so for personalizing and radio installation.
Motor options include a GWS dual B brushed motor or a Fiego Brushless (28) motor with a GWS single A or B gearbox. Each option works with 2-cell LIPO for docile flight characteristics and 3-cell LIPO for unlimited flight.
Foamy T-Bird
T-33
32" Park & Indoor Electric EDF Jet
Specifications:
Wingspan: 32"
Flying Wt: 6.0 oz
Note: The FOAMY T-Bird just won the covented "Best Jet" award at the
2007 JR Indoor Electric Fest!
The kit consists of Depron foam airframe components, Carbon fiber tube stiffeners, and complete assembly instructions. The X-Style fuselage not only adds strength but improves flying characteristics. Building time is less than hour. Plan another 2 hours or so for personalizing and radio installation.
The reccomended power package is a GWS EDF-40 Fan unit with either a Fieago Brushless DF motor or a Medusa 5300 brushless motor powered by a 700 to 900mA 3-cell LIPO. If you would like a power package, send us an email for a quote.
The FOAMY T-Bird has excellent slow flight characteristics, is fully aerobatic, and while not as fast as some, can turn and burn! This Foamy Jet is a blast to fly both indoors and out!!
Edge X
32" Park & Indoor Electric 3D Flyer
Similar to Shock Flyer
Specifications:
Wingspan: 32"
Airframe Wt. 2.6 oz
Flying Wt: 7.2 - 8.0 oz
The Edge X, with it's X style fuselage (2-Axis profile) does all aerobatic maneuvers, including 3D,even better than our previous designs. Design enhancements include a wider vertical profile and improved rudder for better knife edge flight, an increased wingspan (32") for reduced wing loading, and increased stability and stiffness from the X style Fuselage.
The kit continues our Quick build theme with slot and tab fuselage construction to help you build your plane straight and get in the air in record time.
The kit consists of Depron foam airframe components, Carbon fiber tube and balsa stiffeners, hardwood motor mount, pre-bent elevator joining wire, special decals, and complete assembly instructions. Building time is less than 2 hours. Plan another 2 hours or so for personalizing and radio installation.
Motor options include a GWS dual B brushed motor or a Fiego Brushless (28) motor with a GWS single A or B gearbox. Each option works with 2-cell LIPO for docile flight characteristics and 3-cell LIPO for unlimited flight.
Wildcat
24" Park & Indoor Electric Warbird
Capable of 3D
Specifications:
Wingspan: 24"
Airframe Wt: 1.5 oz
Flying Wt: 5.2 - 6.0 oz
The kit consists of Depron foam airframe components, Carbon fiber tube stiffeners, Spruce motor mount, pre-bent elevator joining wire, Decals, and complete assembly instructions. Building time is less than 1 hour. Plan another 2 hours or so for personalizing and radio installation.
Motor options include a GWS dual B brushed motor or a Fiego Brushless (28) motor with a GWS single A or B gearbox. Each option works with 2-cell LIPO for docile flight characteristics and 3-cell LIPO for unlimited flight.
KIT COMPONENTS
1. Airframe components:
q Foamy Flyers kits utilize Depron Foam.
q Precut to the proper size.
q Wing, Stab, and CF locations are marked for ease and to speed assembly.
2. Carbon fiber tubes:
q Used to provide additional stiffness and strength to handle even the most extreme flying loads.
q Precut to proper size.
3. Hardwood motor mount:
q Precut and sized to fit GWS single and Twin gearboxes.
q Sturdy 1/16" plywood for Outrunner firewall.
4. Elevator wire
q Sized and Pre bent to connect elevators together.
5. Assembly instructions:
q Easy to follow Step by Step.
6. Decals:
q On Wildcat, Edge X, and FOAMY T-Bird.
q Printed on white sticky back paper.
Finishing
Depron foam is white and is usually painted with paint Markers or Foam safe paints found at your local craft store.
| 
